Asia-Pacific Β· Glass Manufacturer
Xinyi Glass
π¨π³ China Β· Last reviewed by Justin Orloff
Quick Facts
Founded
1988
HQ
Shenzhen, China
Materials
Float glass, Low-E glass, laminated glass, tempered glass
Specialty
Large-scale float and Low-E glass production; strong export to Europe and North America
Market
Global - construction, automotive, and solar glass markets
Brand at a Glance
- One of China's largest float and Low-E glass producers with global manufacturing and export operations
- Significant export volumes to Europe, North America, and the Middle East as a base glass supplier
- Full processed glass range including Low-E, laminated, tempered, and insulated glazing units
Product Range
- Float glass for construction and automotive base product
- Low-E coated glass for insulated glazing unit energy performance
- Laminated glass for safety, structural, and overhead applications
- Tempered glass for facade, shopfront, and interior applications
- Automotive glass for original equipment and aftermarket
Why This System
Xinyi Glass operates at a scale where their product enters global supply chains as an anonymous base material - a European window fabricator may use Xinyi Low-E glass without the installer or building owner knowing the source. For professional window cleaners, the coating is what matters regardless of manufacturer: any Low-E coating on an inner surface of an insulated unit requires pH-neutral care, undamaged tools, and pre-rinsing. Xinyi is no exception.
China's massive climate variation creates dramatically different soiling profiles. South China (Guangdong, where Xinyi is based) sees typhoon-driven salt and moisture exposure combined with high UV. North China (Beijing, Tianjin) experiences coal and dust loading in winter and yellow dust storms in spring. Glass installed in these environments picks up complex soiling that requires longer dwell time but still demands pH-neutral chemistry and non-abrasive tools.
Step 1 of 2: Manufacturer Recommendations
Official Care Guidance
Step 2 of 2: The Orloffs Protocol
The Orloffs Protocol
This is how I clean Xinyi Glass windows. The tools and technique below come from 25 years of daily professional work on the glass. Every step has been tested on real installations and adapted specifically for Xinyi Glass systems.
Pro Tools
My daily tool list. This is what I carry to every job.
Follow these steps in order. Each one builds on the last. This is the same sequence I use on every Xinyi Glass installation.
- 1
1. Pre-rinse the glass with clean water. In northern China during dust storm season, pre-rinsing is not optional - dry particulate on glass under a squeegee causes irreversible surface scratching.
- 2
2. Apply pH-neutral cleaning solution. Allow longer dwell time in polluted urban environments - Beijing and Shanghai winter pollution films require extra contact time.
- 3
3. Squeegee top to bottom with a fresh blade. Check for nicks in the blade before starting - Xinyi Low-E coatings on inner glass surfaces are protected inside the unit, but the outer glass face can be scratched by a damaged blade.
- 4
4. Inspect unit edges for seal condition. Note any fogging or spacer bar discolouration and report to building management.
- 5
5. Wipe sills and frame perimeters clean - left-behind solution causes white mineral streaks on the next dry cycle.
Pro Tips
- In southern China humidity and typhoon seasons, check weep holes on aluminium or uPVC frames holding Xinyi glass after heavy rain - blocked drainage causes standing water that accelerates unit seal degradation.
- On export-market projects in Europe or North America where Xinyi glass has been specified, follow local climate cleaning protocols - the glass chemistry is consistent regardless of geographic origin.
- Large Xinyi float glass panes on commercial facades require two-person squeegee work on large panels - a solo operator rushing a large pane leaves uneven pressure streaks across the face.
What NOT To Do
- Do not use acid or strongly alkaline cleaners on Xinyi Low-E glass units.
- Do not dry-scrub glass during or after dust storm or typhoon events - pre-rinse first.
- Do not use abrasive materials on Xinyi float or coated glass surfaces.
Bundle Kits and Tool Recommendations
Bundle Kit
Tool Recommendations
pH-neutral glass cleaning detergent
View on Amazon [coming soon]14-inch squeegee with fresh, undamaged rubber
View on Amazon [coming soon]Pure water for pre-rinsing
View on Amazon [coming soon]Cleaning Frequency
Every 6-8 weeks in standard Chinese urban environments. Monthly during typhoon season in southern China and during dust storm season in northern China. On export-market installations, follow local frequency guidelines.
Frequently Asked Questions
Field Notes
βOn Chinese high-rise construction projects where Xinyi glass is specified as the curtain wall glazing, post-construction cleaning is the most complex job. Construction adhesive, silicone sealant smearing, and cement haze are common. Cement haze on Low-E glass requires a dilute acid gel product applied carefully, not scrubbing. Always confirm coating type with the project glazing contractor before treating any large glass elevation with chemical spotting products.β
Justin Orloff
What's next for you?
The Skill
New to window cleaning?
Start with the core techniques before tackling premium systems.
Start Learning βThe Standard
Upskill your team
Covers every system, product type, and tricky scenario.
View The Standard βManufacturer
Partner with Orloffs
Are you Xinyi Glass or a similar manufacturer? Let's create official cleaning guidance together.
Get in Touch β