Skip to content
P

Asia-Pacific · Profile System

Prominance Windows

🇮🇳 India · Last reviewed by Justin Orloff

Quick Facts

HQ

Ahmedabad, Gujarat, India

Materials

uPVC profiles (supplied to fabricators)

Certifications

BSI and SKZ certified

Network

70+ fabricator partners across India

Specialty

Certified uPVC profile supply

Market

India - profile supplier, not direct-to-consumer

Brand at a Glance

  • BSI and SKZ certified - externally validated to British and German standards
  • Supplies profiles to 70+ fabricators; finished window quality depends on fabricator skill
  • Gujarat base puts them at the centre of India's uPVC profile manufacturing cluster

Product Range

  • uPVC profiles for casement windows
  • uPVC profiles for sliding windows
  • uPVC door profiles
  • Complementary hardware and accessories supplied to fabricators

Why This System

BSI and SKZ certification means the raw profile compound meets defined standards for UV resistance, impact strength, and dimensional tolerance. This matters to cleaners because a certified profile is more predictable - it is less likely to chalk, crack, or yellow when cleaned correctly. However, the fabricator using the profile determines the finished window quality.

Prominance profiles are supplied to a wide network of fabricators - some excellent, some not. The cleaning approach is governed by the profile quality, which is consistent, but also by the fabricator's seal and hardware choices, which vary. Gujarat and western India face dry heat, high UV, and dust; other regions served face monsoon loading.

Step 1 of 2: Manufacturer Recommendations

Official Care Guidance

No official guide published. The steps below are based on Justin Orloff's 25 years hands-on experience with this system.

Step 2 of 2: The Orloffs Protocol

The Orloffs Protocol

This is how I clean Prominance Windows windows. The tools and technique below come from 25 years of daily professional work on the glass. Every step has been tested on real installations and adapted specifically for Prominance Windows systems.

Pro Tools

My daily tool list. This is what I carry to every job.

1Ettore Squeegee 14"
2Unger HiFlo Pure Water Pole
3Moerman Liquidator
4Boab Belt System

Follow these steps in order. Each one builds on the last. This is the same sequence I use on every Prominance Windows installation.

  1. 1

    1. Identify the fabricator if possible - fabricator quality affects hardware and seal type.

  2. 2

    2. Pre-rinse frames with clean water to remove dust loading.

  3. 3

    3. Apply pH-neutral detergent; clean glass top to bottom.

  4. 4

    4. Wipe frames with microfibre along the profile length.

  5. 5

    5. Clear weep holes and check seal condition at frame corners.

Watch the Window Cleaning Manifesto hereSee these techniques in action. Free, 5 minutes, lifetime access.

Pro Tips

  • Gujarat dry heat: profiles expand and contract significantly - check corner joints for dust accumulation in the gaps.
  • BSI-certified profiles have better UV resistance, but direct Ahmedabad sun still demands a gentle approach - no solvent cleaners.
  • If you cannot identify the fabricator, treat the window as standard uPVC and proceed with pH-neutral products.

What NOT To Do

  • Do not assume all windows made from Prominance profiles are equal - fabricator skill varies widely.
  • Do not use abrasive pads even on BSI-certified profiles.
  • Do not use alkaline cleaners on uPVC regardless of certification.

Bundle Kits and Tool Recommendations

Bundle Kit

Orloffs Squeegee Pro Pack flat lay
Pro KitThe full professional setup. Brass squeegees, T-bar with applicator cover, tool belt, rags, soap, and bucket. Everything from the daily tool list in one box.Shop now →
Orloffs Squeegee Pro Pack bundled

Tool Recommendations

pH-neutral detergent

View on Amazon [coming soon]

14-inch squeegee

View on Amazon [coming soon]

Microfibre cloths

View on Amazon [coming soon]

Cleaning Frequency

Every 6-8 weeks in dry regions; more frequent in monsoon-exposed western coastal areas.

Frequently Asked Questions

How often should I clean Prominance Windows windows?
For Prominance Windows windows, Every 6-8 weeks in dry regions; more frequent in monsoon-exposed western coastal areas.. Coastal or urban locations may need more frequent cleaning.
What tools do I need for Prominance Windows windows?
Professional cleaning of Prominance Windows windows requires my daily tool list of: Ettore Squeegee 14", Unger HiFlo Pure Water Pole, Moerman Liquidator, Boab Belt System.
What should I avoid on Prominance Windows windows?
Do not assume all windows made from Prominance profiles are equal - fabricator skill varies widely.
Does Prominance Windows publish an official cleaning guide?
Prominance Windows has not published an official cleaning guide. The protocol on this page is based on Justin Orloff's 25 years hands-on experience.
Can I use a water-fed pole on Prominance Windows windows?
Yes, purified water via a water-fed pole is one of the safest methods for Prominance Windows glass. Ensure TDS is at or near zero before use and avoid directing high-pressure water at seals or gaskets.

Field Notes

“When encountering a Prominance-profile window through a fabricator, the profile itself is reliably made. The variable is the rest of the window: seal quality, hardware grade, and corner joining method. Always inspect before cleaning and report any defect to the client - if seals are failing, a clean will not fix it.”

Justin Orloff

What's next for you?

The Skill

New to window cleaning?

Start with the core techniques before tackling premium systems.

Start Learning →

The Standard

Upskill your team

Covers every system, product type, and tricky scenario.

View The Standard →

Manufacturer

Partner with Orloffs

Are you Prominance Windows or a similar manufacturer? Let's create official cleaning guidance together.

Get in Touch →