Skip to content
Lux Windows and Glass logo

North America ยท Window Manufacturer

Lux Windows and Glass

๐Ÿ‡จ๐Ÿ‡ฆ Canada ยท Last reviewed by Justin Orloff

Lux Windows and Glass window product

Lux Windows window systems

Quick Facts

founded

1978

hq

Edmonton, Alberta, Canada

primaryMaterials

uPVC and aluminium frames, double and triple glazing

glazingPartner

In-house glazing specification

marketTier

Mid-Range

Brand at a Glance

  • Founded: 1978
  • HQ: Edmonton, Alberta, Canada
  • Market position: Mid-range residential and commercial uPVC and aluminium windows
  • Climate context: Alberta - extreme cold (-30C), hot dry summers (+35C), high annual sunshine hours
  • Distribution: Alberta and Western Canada residential and commercial market
  • Certifications: ENERGY STAR, CSA A440
  • Website: luxwindows.com

Product Range

  • uPVC Casement and Awning Windows
  • uPVC Sliding Windows and Doors
  • Aluminium Commercial Windows
  • Triple-Glazed Systems

Why This System

Alberta's climate is continental extreme - very cold winters and dry, often hot summers. uPVC in this environment cycles through a wider thermal range than in coastal or Eastern Canadian climates. Frame corner welds and co-extruded gaskets experience more cumulative stress here. Edmonton's high sunshine hours combine UV exposure with freeze-thaw cycling - a combination that accelerates UV stabiliser consumption in uPVC faster than either condition alone. Aluminium window systems in Edmonton require thermal break construction - standard aluminium without a thermal break creates a condensation highway between the cold exterior and the warm interior. On cleaning visits, the thermal break zone at the frame mid-section should not receive water.

Step 1 of 2: Manufacturer Recommendations

Official Care Guidance

No official guide published. The steps below are based on Justin Orloff's 25 years hands-on experience with this system.

Step 2 of 2: The Orloffs Protocol

The Orloffs Protocol

This is how I clean Lux Windows and Glass windows. The tools and technique below come from 25 years of daily professional work on the glass. Every step has been tested on real installations and adapted specifically for Lux Windows and Glass systems.

Pro Tools

My daily tool list. This is what I carry to every job.

1Ettore squeegee 14 inch
2PTFE lubricant spray
3Narrow drainage brush
Watch the Window Cleaning Manifesto hereSee these techniques in action. Free, 5 minutes, lifetime access.

Pro Tips

  • Schedule Edmonton window cleaning for May through September - this is the professional season. Clients who ask for winter cleaning should be advised that the results will be substandard and the service risk is higher
  • After an Alberta chinook wind event in winter or early spring, check the perimeter sealant on Lux windows - chinooks drive rapid temperature changes of 15-20 degrees in hours, which stresses perimeter seals more than slow seasonal cycling
  • On Edmonton commercial Lux aluminium systems, wipe down all aluminium surfaces with a pH-neutral cloth before applying cleaner - road dust in Alberta is highly abrasive silica-based grit that scratches powder-coat if dragged across the surface during cleaning

What NOT To Do

  • Do not clean windows at below +5C - cleaning solutions freeze on frame and glass surfaces
  • Do not use abrasive pads or solvents on uPVC frames
  • Do not introduce water into the thermal break zone on aluminium commercial window profiles
  • Do not use acidic cleaners on powder-coated aluminium
  • Do not skip spring perimeter sealant inspection - Alberta freeze-thaw stresses sealant harder than most Canadian markets

Bundle Kits and Tool Recommendations

Bundle Kit

Orloffs Squeegee Pro Pack flat lay
Pro KitThe full professional setup. Brass squeegees, T-bar with applicator cover, tool belt, rags, soap, and bucket. Everything from the daily tool list in one box.Shop now โ†’
Orloffs Squeegee Pro Pack bundled

Tool Recommendations

Ettore squeegee 14 inch

View on Amazon [coming soon]

pH-neutral glass and frame cleaning concentrate

View on Amazon [coming soon]

Microfibre washer applicator

View on Amazon [coming soon]

Cleaning Frequency

Clean every 4โ€“8 weeks depending on environment.

Frequently Asked Questions

How often should I clean Lux Windows and Glass windows?
For Lux Windows and Glass windows, we recommend cleaning twice a year depending on your local environment. Coastal or urban locations may need more frequent cleaning.
What tools do I need for Lux Windows and Glass windows?
Professional cleaning of Lux Windows and Glass windows requires my daily tool list of: Ettore squeegee 14 inch, PTFE lubricant spray, Narrow drainage brush.
What should I avoid on Lux Windows and Glass windows?
Do not clean windows at below +5C - cleaning solutions freeze on frame and glass surfaces
Does Lux Windows and Glass publish an official cleaning guide?
Lux Windows and Glass has not published an official cleaning guide. The protocol on this page is based on Justin Orloff's 25 years hands-on experience.
Can I use a water-fed pole on Lux Windows and Glass windows?
Yes, purified water via a water-fed pole is one of the safest methods for Lux Windows and Glass glass. Ensure TDS is at or near zero before use and avoid directing high-pressure water at seals or gaskets.

Field Notes

โ€œEdmonton clients are accustomed to a short outdoor service window - from May through September is the practical cleaning season. Spring visits immediately after snowmelt are heavy work - budget extra time for debris clearing, sealant inspection, and hardware checks. Alberta UV is underestimated. Edmonton gets more annual sunshine hours than Toronto. uPVC on south-facing elevations in Edmonton discolours faster than in Eastern Canada despite the cold winters. Document colour condition annually. Commercial Lux aluminium systems in Edmonton often have weep holes that are partially blocked by construction debris in newer buildings. The first post-occupancy cleaning visit should include a systematic weep hole check and clearing on all commercial frames.โ€

Justin Orloff