Skip to content
A

Middle East Β· Glass Manufacturer

AGC Obeikan Glass

πŸ‡ΈπŸ‡¦ Saudi Arabia Β· Last reviewed by Justin Orloff

Quick Facts

HQ

Riyadh, Saudi Arabia

JV Partners

AGC Inc., Japan and Obeikan Investment Group, Saudi Arabia

Materials

High-performance coated glass (solar control, low-e)

Specialty

AGC thin-film coating technology produced regionally

Market

Middle East and Africa - coated glass supply

Brand at a Glance

  • Saudi-Japanese JV bringing AGC Japan coating technology to regional production
  • Riyadh base serves Gulf and African export markets
  • High-performance solar control and low-e coatings specified on major Gulf commercial buildings

Product Range

  • Solar control coated glass (AGC Stopray range equivalents for ME market)
  • Low-emissivity (low-e) glass for thermal performance
  • Double-glazed insulating glass units with high-performance coatings
  • Custom coated glass to architect specification

Why This System

AGC's coating technology is among the most advanced in the global glass industry. AGC Obeikan brings this to the Gulf market from a regional plant rather than importing from Japan or Europe. For cleaners, this means high-performance coated glass - with soft coatings that require coating-safe cleaning - is now widely available and specified across Saudi and Gulf commercial buildings.

AGC Obeikan coated glass uses magnetron sputtered coatings - thin-film layers applied to the glass surface in a vacuum process. In a double-glazed unit, the coating is on the inner surface of the outer pane (Position 2) and is not accessible to cleaners. However, some installations use single-glazed coated glass or have the coating on an accessible surface. In all cases, coating-safe protocol is the only safe approach in the Gulf.

Step 1 of 2: Manufacturer Recommendations

Official Care Guidance

No official guide published. The steps below are based on Justin Orloff's 25 years hands-on experience with this system.

Step 2 of 2: The Orloffs Protocol

The Orloffs Protocol

This is how I clean AGC Obeikan Glass windows. The tools and technique below come from 25 years of daily professional work on the glass. Every step has been tested on real installations and adapted specifically for AGC Obeikan Glass systems.

Pro Tools

My daily tool list. This is what I carry to every job.

1Ettore Squeegee 18"
2Unger HiFlo Pure Water Pole
3Moerman Liquidator
4Boab Belt System

Follow these steps in order. Each one builds on the last. This is the same sequence I use on every AGC Obeikan Glass installation.

  1. 1

    1. Identify whether coated surface is accessible - check glass edge for AGC etching marks.

  2. 2

    2. Flush with clean water before detergent - Gulf sand on coated glass is a coating scratch risk.

  3. 3

    3. Apply coating-safe pH-neutral detergent only.

  4. 4

    4. Squeegee with fresh rubber in overlapping strokes.

  5. 5

    5. Rinse with pure water where available; detail edges with Liquidator.

Watch the Window Cleaning Manifesto hereSee these techniques in action. Free, 5 minutes, lifetime access.

Pro Tips

  • AGC Obeikan coated glass may have soft coatings on accessible surfaces - treat every commercial glass face as potentially coated until confirmed otherwise.
  • Gulf construction dust contains silica particles - these will scratch coatings if dragged across the surface dry. Pre-rinse is non-negotiable.
  • Saudi summer: even at 7am, glass is hot. Cool the surface briefly with water before applying detergent.

What NOT To Do

  • Do not use razor blades on any AGC Obeikan coated glass.
  • Do not dry-wipe coated glass in dusty Gulf conditions.
  • Do not use abrasive scrubbers on any coated surface.

Bundle Kits and Tool Recommendations

Bundle Kit

Orloffs Squeegee Pro Pack flat lay
Pro KitThe full professional setup. Brass squeegees, T-bar with applicator cover, tool belt, rags, soap, and bucket. Everything from the daily tool list in one box.Shop now β†’
Orloffs Squeegee Pro Pack bundled

Tool Recommendations

Coating-safe pH-neutral detergent

View on Amazon [coming soon]

Pure water rinse system

View on Amazon [coming soon]

18-inch squeegee with fresh rubber

View on Amazon [coming soon]

Cleaning Frequency

Monthly on commercial facades in the Gulf. More frequent during construction phases when dust loading is extreme.

Frequently Asked Questions

How often should I clean AGC Obeikan Glass windows?
For AGC Obeikan Glass windows, Monthly on commercial facades in the Gulf. More frequent during construction phases when dust loading is extreme.. Coastal or urban locations may need more frequent cleaning.
What tools do I need for AGC Obeikan Glass windows?
Professional cleaning of AGC Obeikan Glass windows requires my daily tool list of: Ettore Squeegee 18", Unger HiFlo Pure Water Pole, Moerman Liquidator, Boab Belt System.
What should I avoid on AGC Obeikan Glass windows?
Do not use razor blades on any AGC Obeikan coated glass.
Does AGC Obeikan Glass publish an official cleaning guide?
AGC Obeikan Glass has not published an official cleaning guide. The protocol on this page is based on Justin Orloff's 25 years hands-on experience.
Can I use a water-fed pole on AGC Obeikan Glass windows?
Yes, purified water via a water-fed pole is one of the safest methods for AGC Obeikan Glass glass. Ensure TDS is at or near zero before use and avoid directing high-pressure water at seals or gaskets.

Field Notes

β€œAGC Obeikan glass is on major commercial buildings across Riyadh, Jeddah, and the wider Gulf. These are often high-specification projects with building managers who understand glass performance. Position your cleaning service accordingly - coating-safe protocol is not optional, it is the minimum standard the building specification demands.”

Justin Orloff